-
×
Greaseweazle V4.1 USB Floppy Adapter Flux Reader Writer
1 × AUD$ 54.99
Subtotal: AUD$ 54.99
| Weight | 0.5 kg |
|---|---|
| Dimensions | 35 × 30 × 1 cm |
Based on 0 reviews
Only logged in customers who have purchased this product may leave a review.
Related products
-
Accelerator Cards, Hardware, Amiga
A630 Rev 2 Accelerator 68030 50Mhz inc FPU for Amiga A600
A630 Rev 2 68030 50Mhz inc FPU is a classic 68030 Motorola accellerator for the Amiga 600 running at 50Mhz and includes an onboard FPU. Perfect for that a speedboost, WHDLoad* gaming, internet, etc.
Full specs:
- CPU MC68030, clocked on 50MHz.
- FPU 68882FN40 – synchronous or asynchronous clocking
- 64MB SDRAM Fast Ram
- Cooling: Active included
- PCMCIA Friendly
More Information can be found at the Archi-tech website – https://wiki.archi-tech.com.pl/pl/A630rev2
MMULib’s for the A630 Accelerator
The A630 Accelerator requires the installation of MMULib’s and it very important you use the right ones for the kickstart ROM you are using:
3.1 Kickstart:
http://main.aminet.net/util/libs/MMULib.lha
http://main.aminet.net/util/libs/MMULib.readme3.2, 3.2.1 or 3.2.2
Install the MMULib package that came with the AmigaOS 3.2 installation CD ONLY and NOT the ones from Aminet.
Important Information
- Some demos or games may require disable “CPU CACHE” for better compatibility with the MC68000.
- The card is designed to work with 3.1 Roms and above including 3.2 and 3.2.1
- An internal HDD/CF/SD Card needs to be installed for the A630 to boot.
SKU: RK0053 -
Parts, Hardware, Amiga
Amiga Keycaps Set
Back in stock!
Replacement Keycaps for the Amiga classic computers.
Each sets contains 108 keycaps. These will replace all your current yellowed and worn caps. Sets can be used on ISO & ANSI keyboards and you can find extra caps to support the specifics of the A600 profiles.
With these you make your old keyboard get its glory & shine back!
For all models equipped with Mistumi – Hybrid switches except the A1000.
SKU: n/a -
Hardware
Gotek External Drive with FlashFloppy Installed
The Gotek drive is a USB stick-based floppy drive replacement that replaces your existing floppy drive or can be installed in an external enclosure. The Gotek drive is flashed with FlashFloppy firmware which allows it work with various computers including the Commodore Amiga, Amstrad CPC computers*, Sinclair Spectrum*, Atari and DOS / IBM PC’s
This Gotek drive will work with all Commodore Amiga computers including:
- Amiga A500
- Amiga A500 Plus
- Amiga A600
- Amiga A1200
- Amiga A1000
- Amiga A1500
- Amiga A2000
- Amiga A3000
- Amiga A4000
- Amiga 4000T
Includes generic installation screws. Please check these are compatible with your computer prior to installation
USB Sticks and cables are not included.
*Amstrad / Spectrum or computers with 3″ disk drives or old PCs with 5.25″ drives
SKU: n/a -
Hardware
Greaseweazle V4.1 USB Floppy Adapter Flux Reader Writer
Now available with optional case!
Greaseweazle allows versatile floppy drive control over USB. By extracting the raw flux transitions from a drive, any disk format can be captured and analyzed – PC, Amiga, Amstrad, PDP-11, musical instruments, industrial equipment, and more. The Greaseweazle also supports writing to floppy disks, from a range of image file formats including those commonly used for online preservation (ADF, IPF, DSK, IMG, HFE, …).
Greaseweazle V4.1 is the very latest version, updating the V4 design with new features:
- Larger form factor with stronger mounting holes
- Modern USB-C connector
- Input protections (ESD, over-current)
- USB power isolation, allows Greaseweazle to be powered by external PSU along with drive(s)
- Latest board design by George R. Mezzomo
- V4 Features:
- Reads and writes 3″, 3.5″, 5.25″, 8″ disks (with suitable drive and cable)
- Buffered outputs, for communicating with older 5.25″ and 8″ disk drives
- Integrated power connector for directly powering most 3.5″ disk drives
- Write-enable jumper can be removed for safer preservation of precious vintage disks
- Supports flippy-modded 5.25″ drives
- Supports Disk-Change detection as used by Rob Smith’s integration into the WinUAE Amiga emulator
- 3 user-definable outputs (eg. 8″ interface REDWC signal)
- 100% factory tested, and tested again before shipping
More information and documentation from Keir Fraser’s wiki: https://github.com/keirf/Greaseweazle/wiki/V4.1-Setup
This listing is for the Greaseweazle V4 device only. You will additionally require:
- A disk drive (for example a PC 3.5″ or 5.25″ drive)
- A floppy ribbon cable (typically you want a standard PC cable with ‘twist’ on pins 10-16, to communicate with a PC floppy drive)
- Floppy drive power cable, or power supply
Recommended host OS: Windows 10/11, Ubuntu Linux, macOS (recent versions).
Most up-to-date versions of macOS and Linux distributions should also work (but less tested).
SKU: RK0056
There are no reviews yet.